Bringing Images To Life!TM

Apex

PF-1004-2027

CLEARANCE Save 35% Off

Apex™ is suitable for full color graphics, names and numbers for sportswear, uniforms, and promotional work wear. Developed specifically for inkjet printers using pigment, dye based or eco-solvent inks (with some restrictions). This product produces garment transfers that can be washed in high temperature water, dry cleaned and ironed.

This material is ideally suited for work uniforms, teamwear, and other items that are constantly washed using commercial washers.

Available in 20" wide rolls
Sold in 27 yard rolls
MultiTack Light sold separately

Available in the Following Warehouses:
Blaine WA, Las Vegas NV, Nashville TN

Select roll width

Select roll length

Price per roll

$216.00
Reg. $335.07

Need to speak to someone?
M-F 7:00am-4:30pm PST
1-800-565-5686

Transfer Film: Polyurethane, cast
Adhesive: Polyurethane-hotmelt
Thickness [mm]: 0,16 (160‎μ)
Liner: Silicone-paper

When used under normal conditions, this product does not generate or release any dangerous substances or hazardous chemicals. This is a non-hazardous product in accordance with the current GefStoffV and EU criteria. Therefore it is not necessary to prepare a Material Safety Data Sheet for this product. The Safety Data Sheet serves only to comply with the regulation to supply information in accordance with REACH Regulation (EC) No. 1907/2006 and is available on request. This product is not a hazardous product with regards to transportation legislation; neither does it contain substances that are hazardous to water within the meaning of the federal water act. After use, dispose of the waste product in accordance with the local / national authorities.

POLI-FLEX 4600 can only be ironed on the reverse side.

Inks
Dye based and Pigment
Temperature
310-330F (155-165C)
Time
15 seconds
Pressure
Medium
Peel
Cold
Cutting Blade
45 degree
Recommended Cut Force
40-75gf
Image
Right Reading
Wash Temperature
175F (80C)
Tack
Light

Accessories Required
Computer, Inkjet Printer with Solvent, Eco-Solvent inks, Cutter, Heat Press

Printable Side
The printable side (white matte coated side) is on the outside of the roll.

Cutting Notes
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.

Muliple Finishes
Use MultiGlaze Gloss for Gloss finish
Use MultiGlaze Matte for Matte finish

Care Instructions
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash Temperature cannot exceed 175F

Storage
MultiPrint Apex has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.