Bringing Images To Life!TM

Joto Auto Release ClamShell Heat Press 15 x 15

E-HP-JAR-1515M

With Joto's new auto clam heat press, it is not necessary to wait by the press, while the transfer is pressed.  Simply close the press, and it will auto open once the timer counts down to 0.  This press is also equipped with a warning sound when the transfer is done.

The Joto AutoClam Press is fully digital with a manual pressure adjustment knob.  This heat press is ideally suited for pressing thin sublimation items as well as heat transfer flex.

Features:

  • Fully digital Temperature and Time controls
  • Magnetic Auto Open Feature
  • Space Saving Clam Shell Design
  • Adjustable Pressure
  • Max temperature of 410F (205C)
  • Temperature can be display in Celsius, or Fahrenheit
  • Platen Size Available in 14.9" x 14.9"
  • Two-year warranty on press
  • 5 Years warranty on heating platen

Shipping from the following warehouses:
Blaine WA, Las Vegas NV, Nashville TN

Select platen size

$795.00

Need to speak to someone?
M-F 7:00am-4:30pm PST
1-800-565-5686

Printable Materials:    Up to 0.2" (5mm) Thickness
Opening Angle:    50°
Gas Spring Control:    Yes
Voltage:    120V/220V
Power:    1750W/1800W
Time Range:    0-999 sec
Maximum Temp:    491°F (225C)
Temperature Accuracy:    ±0.5%
Packing Size:    14.9" x 14.9" model (540mm x 880mm x 570mm)
Gross Weight:   90lbs (41kg) 

STATEMENT OF WARRANTY

 

E-HP-JAR-1620/ E-HP-JAR-1515

Joto warrants to the original purchaser Joto’s E-HP-JAR-1620/ E-HP-JAR-1515 heat presses or component that such heat press or component is free from defects in materials and workmanship, subject to the limitations set forth below.

IN LIEU OF ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH JOTO HEREBY DISCLAIMS, THE OBLIGATIONS OF JOTO UNDER THIS WARRANTY ARE EXPRESSLY LIMITED TO THE FOLLOWING:

  1. Joto will repair or replace at its option, free of charge, any product, component of its products, and any component it sells separately which is installed in Joto’s heat presses, within twenty-four months and sixty months for the heating platen after
    shipment by same.
  2. This warranty does not apply to damage incurred in shipment. Damage incurred in shipment should be reported to the designated carrier. It is the carrier’s responsibility to ensure arrival in undamaged condition.
  3. Service labor, when requested in connection with any of the above items covered by this warranty, will be charged for traveling expenses only.
  4. This warranty applies only if the product or component proves to be defective under conditions of normal use. It does not apply to breakage or to defects resulting from accident, alteration, misuse, or improper installation.
  5. This warranty does not include installation of the product or component.
  6. Prior to any return of a product or component, Buyer must receive written authorization to do so from Joto.  After written authorization, Buyer shall return the defective product or component freight prepaid by the original purchaser and Joto will ship the replacement or repaired component freight prepaid by Joto.
  7. This warranty is effective only if the product or component is installed in a location and manner prescribed by JOTO instructions and only if it is maintained in accordance therewith. This warranty shall become ineffective if the product or component is altered by anyone other than JOTO employees. JOTO neither assumes, nor authorizes any person to assume for it, any obligation or liability other than as specified herein.

JOTO WILL IN NO CASE AND UNDER NO CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT OR COMMISSION, OR FOR LOSS OR DELAY IN PRODUCTION.

Without limiting the generality of the foregoing, Joto will not be liable with respect to furnishing or delay in furnishing any product or component, the use, resale or other disposition thereof, failure to furnish the same, or any other cause. Joto liability arising out of the supply of any product or component, its use, resale or other disposition, or out of any guarantee or warranty, express or implied, or any other cause shall in no case exceed the cost to Joto of the product or component which JOTO has agreed to supply. All liability of Joto with respect to any product or component shall terminate upon the expiration of the twenty-four month period described above.

-Any controversy or claim arising out of or relating to transactions or orders or breach thereof, including breach of warranty, shall be settled by arbitration in Blaine, Washington, pursuant to the rules of American Arbitration Association. Any award made against Joto shall be limited as provided above. Judgment upon award rendered by arbitration may be entered in any court having jurisdiction thereof. However, at Joto’s option, this paragraph shall not apply to collection by Joto of the price of any product sold or any action related thereto.

Turning On Your Heat Press
Turn the Main Power Switch on. The Main Power Switch is at the right side of the heat press.
Current temperature, set temperature, current time, set time will display.

How to Read The Display

  1. Right side PV value = Current Temperature
  2. Left side PV value = Current Time
  3. Right side SV value = Set Press Temperature
  4. Left side SV value = Set Press Time


Setting Press Temperature

  • Press OK to start. Use the up and down arrows to choose to display in °F or °C.  °F stands for Fahrenheit, °C stands for Celsius
  • Once selection is made, press ok to save.
  • Green set temperature value will flash.  Use the up and down arrows to set press temperature value. Press ok to save

Note: Setting the press temperature to above 200C may cause a fire hazard.

Setting Press Time

  • Green Set Time Value will flash. Use the up and down arrows to change the value.
  • Press ok to save the value.
  • Wait until the current temperature is the same as the set temperature before using.
  • The press will beep once set temperature is reached. Close and open the press to stop the beeping