Sale Save 10% Off
MultiCut Ultra Gloss transfer vinyl is available in 6 hot new colors, all with a Gloss finish.
Manufactured to the same specifications as MultiCut Ultra, Ultra Gloss has a adhesive carrier backing for easy alignment and repositioning.
With the ability to layer up to 3 colors, Ultra Gloss allows you to create multi-colored designs quickly and cost-effectively. Additionally, you can combine Ultra with Ultra Gloss to produce an exciting and unique multi-finish design!
Available in 6 popular colors
Roll Size: 20"
Length: 3, 6, 9, 30 yards
Shipping from the following warehouses:
Blaine WA, Las Vegas NV
Transfer Film: Polyurethane, cast
Adhesive: Polyurethane-hotmelt
Thickness [mm]: 0,10 +/- 5 %
Liner: PET-film, self-adhesive
When used under normal conditions, this product does not generate or release any dangerous substances or hazardous chemicals. This is a non-hazardous product in accordance with the current GefStoffV and EU criteria. Therefore it is not necessary to prepare a Material Safety Data Sheet for this product. The Safety Data Sheet serves only to comply with the regulation to supply information in accordance with REACH Regulation (EC) No. 1907/2006 and is available on request. This product is not a hazardous product with regards to transportation legislation; neither does it contain substances that are hazardous to water within the meaning of the federal water act. After use, dispose of the waste product in accordance with the local / national authorities.
Multi Color Layering
When producing multi-colored designs, Metallics 4UL20-4UL30, Neons 4UL40-4UL43, and Light Blue 4UL03 cannot be layered.
MultiColor designs
When producing MultiColor designs, it is recommended that cutline for all cutlines be cut for each color. After cutting weed off all parts that are not needed. The excess cut lines will help with color registration.
Storage
MultiCut-Ultra has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity. Keep backing free of dust and other particles
Cutting Notes
You should always test cut prior to any production run. Cutter settings may need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
* If pressing to Polyester fabrics that are not white, You will need to use either dye resistant colors or BlockOut.
Do not use a teflon sheet when pressing